# Connect your sound board > Send Dubr its own mix from the sound board, the “Dubr” mix: the speaking mics and the singers, no instruments. Bring it into the Mac through an audio interface. Dubr Help Center / Setting up the booth Mac. Source: https://dubr.live/help/booth-mac/connect-sound-board 1. On the board, make a mix with the pulpit and speaking mics and the singers. Leave the instruments out. If singers harmonize, ad-lib or hum a lot, keep only the worship leader’s mic from the singers. 2. Connect that send to the Mac through your church’s USB audio interface (or the Mac’s audio input). 3. On Live, open **Live input** and choose the interface. A multi-channel interface also lists each channel and an **Automatic channel** option that follows the strongest input. 4. Press **Test audio** to check the level. - Don’t see your interface? Plug it in, then use the refresh icon next to the input (**Refresh audio inputs**). - Dubr never switches to another microphone on its own. If the chosen input disappears, it says so and waits for you to choose again. - Usually the right input is your audio interface, not the Mac’s built-in microphone.