# Dubr hears nothing from the sound board > Check the cable, the mixer send and that the right input is chosen on Live, then run Test audio. Dubr Help Center / Troubleshooting. Source: https://dubr.live/help/troubleshooting/no-sound-on-mac 1. On Live, make sure **Live input** shows your audio interface, not the Mac’s built-in microphone. 2. Don’t see it? Reconnect the interface and use **Refresh audio inputs**. 3. Press **Test audio** and have someone speak at the pulpit. If it says **No sound**, check the fader and the send on the board. 4. Still nothing? Check that Dubr is allowed in System Settings → Privacy & Security → Microphone.